Hull, MAMA HIC #203912Since 1995

Equipment Pads & Heavy-Duty Slabs in Hull, MA

Sized to the load and the machine, not to a standard four inches.

Free estimates. Licensed and insured. No high-pressure sales.

30+
Years in Business
MA HIC
#203912
5.0★
21 Reviews
1 Day
Response Time
Equipment Pads & Heavy-Duty Slabs in Hull, MA

Licensed equipment pads & heavy-duty slabs in Hull

Need equipment pads & heavy-duty slabs in Hull, MA? Concrete Solutions LLC is a licensed, insured residential and commercial contractor, trusted by homeowners, HOA and condo boards, and property managers, serving Hull, Hingham, Cohasset, and the rest of Plymouth County. We've handled concrete, masonry, and waterproofing across Eastern Massachusetts since 1995, with free written estimates, fair pricing, and a workmanship guarantee.

A residential slab spreads a light, even load. An equipment pad does the opposite: it carries the whole weight of a machine through a few small feet or skids, takes vibration while that machine runs, and gets loaded and unloaded by something on steel tracks. That is why equipment pads are a thicker, heavily reinforced section on a proof-rolled base, with the anchor bolts and conduit stub-ups set to the equipment's own template before the concrete goes down. Get the section and the subgrade right and the pad outlasts the equipment on it. Get them wrong and it cracks at the feet in the first year.

Method & materials

How we approach equipment pads & heavy-duty slabs

Section sized to the actual load path, commonly six to eight inches with a reinforcing bar mat rather than the four inches and mesh used for foot traffic.
Sub-base compacted in lifts and proof-rolled, because a pad that bridges a soft spot cracks at the point loads no matter how thick it is.
Raised, curbed housekeeping pads under generators, transformers, and compressors so the equipment sits above wash-down and standing water.
Anchor bolts, embeds, and conduit stub-ups set to the manufacturer's template and tied to the steel before the pour, not drilled in afterward.
Thickened edges and tooled joints where tracked or wheeled equipment climbs on and off, which is where pads chip first.
Air-entrained exterior mix and grading that drains away from the equipment.

What goes wrong when it's done cheap

  • A four-inch residential slab poured under a generator, a dumpster, or loader traffic, which cracks at the point loads within a season.
  • Anchor bolts drilled after the pour, spalling the pad edge and hitting the reinforcement that was supposed to hold it together.
  • No housekeeping pad, so the equipment sits in standing water and the base of the unit corrodes.
  • Subgrade never proof-rolled, so the slab spans a soft spot and cracks along it.
  • Square, unthickened edges where tracked equipment gets on, which break away and then undermine the rest of the pad.
What's included

Our equipment pads & heavy-duty slabs scope

Generator, transformer, and compressor pads
Equipment yard and laydown slabs
Dumpster and enclosure pads with approach aprons
Housekeeping pads and equipment plinths
Anchor bolt, embed, and conduit setting
Thickened-edge slabs for tracked and loader traffic
Why Hull chooses us

Honest scope, work that lasts

We fix the cause

We find the actual cause before we quote, so the repair holds, not just a cover-up on the part you can see. Straight answers, no scare tactics.

MA HIC #203912

Massachusetts licensed and fully insured. We pull permits with the Hull Building Department when the scope calls for it.

No pressure, written price

A free, written estimate for your Hull project and a workmanship guarantee in writing. No scare tactics.

Recent work

From the field

Equipment Pads & Heavy-Duty Slabs near Hull, MA by Concrete Solutions LLC
Equipment Pads & Heavy-Duty Slabs, recent Coastal South Shore project
Equipment Pads & Heavy-Duty Slabs near Hull, MA by Concrete Solutions LLC
Equipment Pads & Heavy-Duty Slabs, recent Coastal South Shore project
Common questions

Equipment Pads & Heavy-Duty Slabs in Hull, FAQs

Do you offer equipment pads & heavy-duty slabs in Hull, MA?
Yes, Hull is in our core service area. We serve Hull and nearby Hingham, Cohasset with free, no-obligation estimates, usually scheduled within a couple of business days. Call (774) 464-3682.
How much does equipment pads & heavy-duty slabs cost in Hull?
Cost depends on the size and condition of the job, so we price every Hull project after a free on-site look and give you a written, itemized estimate up front, no obligation and no high-pressure sales.
Do I need a permit for equipment pads & heavy-duty slabs in Hull?
It depends on scope. Some equipment pads & heavy-duty slabs work is a straightforward repair that doesn't need a permit; larger or structural scopes can. When a permit is needed, we pull it with the Hull Building Department on your behalf.
How thick does an equipment pad need to be?
Thicker than a walkway and it depends on the load. Pads carrying equipment commonly run six to eight inches with a reinforcing bar mat, and heavier where the load lands on a few small feet or where tracked machines drive on. We size it from the equipment weight, its footprint, and how it gets on and off the pad rather than from a default number.
Do you set the anchor bolts, or does the equipment installer?
We set them, to the manufacturer's template and tied into the reinforcement before placement. Drilling anchors into a cured pad is where you get edge spalls and drilled-through rebar, and it is the most common reason a good pad ends up compromised.
What is a housekeeping pad and do I need one?
It is the raised, curbed plinth the equipment actually sits on, typically a few inches above the surrounding slab. It keeps the unit out of standing and wash-down water and gives a clean anchoring surface. For generators, transformers, and anything in a wash-down area, it is worth the small extra cost.
Get a free estimate

Get a free equipment pads & heavy-duty slabs estimate in Hull

Tell us what you're seeing. We respond within one business day, no high-pressure sales calls.

  • Free, written estimate
  • MA HIC #203912 · licensed & insured
  • Local, licensed, and dependable
Or call now (774) 464-3682

By submitting, you agree to be contacted by Concrete Solutions & Waterproofing about your project.

More in Hull

Related services & nearby towns